z80/hdmi.old
Archived
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

First commit

Browse Source
This commit is contained in:
Dreaded_X
2020-09-19 23:42:44 +02:00
commit 90e280af07
442 changed files with 119061 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

59
ipcore_dir/hdmi_clk/example_design/hdmi_clk_exdes.ucf Executable file
View File

@@ -0,0 +1,59 @@
# file: hdmi_clk_exdes.ucf
#
# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
#
# This file contains confidential and proprietary information
# of Xilinx, Inc. and is protected under U.S. and
# international copyright and other intellectual property
# laws.
#
# DISCLAIMER
# This disclaimer is not a license and does not grant any
# rights to the materials distributed herewith. Except as
# otherwise provided in a valid license issued to you by
# Xilinx, and to the maximum extent permitted by applicable
# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
# (2) Xilinx shall not be liable (whether in contract or tort,
# including negligence, or under any other theory of
# liability) for any loss or damage of any kind or nature
# related to, arising under or in connection with these
# materials, including for any direct, or any indirect,
# special, incidental, or consequential loss or damage
# (including loss of data, profits, goodwill, or any type of
# loss or damage suffered as a result of any action brought
# by a third party) even if such damage or loss was
# reasonably foreseeable or Xilinx had been advised of the
# possibility of the same.
#
# CRITICAL APPLICATIONS
# Xilinx products are not designed or intended to be fail-
# safe, or for use in any application requiring fail-safe
# performance, such as life-support or safety devices or
# systems, Class III medical devices, nuclear facilities,
# applications related to the deployment of airbags, or any
# other applications that could lead to death, personal
# injury, or severe property or environmental damage
# (individually and collectively, "Critical
# Applications"). Customer assumes the sole risk and
# liability of any use of Xilinx products in Critical
# Applications, subject only to applicable laws and
# regulations governing limitations on product liability.
#
# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
# PART OF THIS FILE AT ALL TIMES.
#
# Input clock periods. These duplicate the values entered for the
# input clocks. You can use these to time your system
#----------------------------------------------------------------
NET "CLK_IN1" TNM_NET = "CLK_IN1";
TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.000 ns HIGH 50% INPUT_JITTER 200.0ps;
# FALSE PATH constraints
PIN "COUNTER_RESET" TIG;

169
ipcore_dir/hdmi_clk/example_design/hdmi_clk_exdes.v Executable file
View File

@@ -0,0 +1,169 @@
// file: hdmi_clk_exdes.v
//
// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//
//----------------------------------------------------------------------------
// Clocking wizard example design
//----------------------------------------------------------------------------
// This example design instantiates the created clocking network, where each
// output clock drives a counter. The high bit of each counter is ported.
//----------------------------------------------------------------------------
`timescale 1ps/1ps
module hdmi_clk_exdes
#(
parameter TCQ = 100
)
(// Clock in ports
input CLK_IN1,
// Reset that only drives logic in example design
input COUNTER_RESET,
output [2:1] CLK_OUT,
// High bits of counters driven by clocks
output [2:1] COUNT
);
// Parameters for the counters
//-------------------------------
// Counter width
localparam C_W = 16;
localparam NUM_C = 2;
genvar count_gen;
// Create reset for the counters
wire reset_int = COUNTER_RESET;
reg [NUM_C:1] rst_sync;
reg [NUM_C:1] rst_sync_int;
reg [NUM_C:1] rst_sync_int1;
reg [NUM_C:1] rst_sync_int2;
// Declare the clocks and counters
wire [NUM_C:1] clk_int;
wire [NUM_C:1] clk_n;
wire [NUM_C:1] clk;
reg [C_W-1:0] counter [NUM_C:1];
// Instantiation of the clocking network
//--------------------------------------
hdmi_clk clknetwork
(// Clock in ports
.CLK_IN1 (CLK_IN1),
// Clock out ports
.CLK_OUT1 (clk_int[1]),
.CLK_OUT2 (clk_int[2]));
genvar clk_out_pins;
generate
for (clk_out_pins = 1; clk_out_pins <= NUM_C; clk_out_pins = clk_out_pins + 1)
begin: gen_outclk_oddr
assign clk_n[clk_out_pins] = ~clk[clk_out_pins];
ODDR2 clkout_oddr
(.Q (CLK_OUT[clk_out_pins]),
.C0 (clk[clk_out_pins]),
.C1 (clk_n[clk_out_pins]),
.CE (1'b1),
.D0 (1'b1),
.D1 (1'b0),
.R (1'b0),
.S (1'b0));
end
endgenerate
// Connect the output clocks to the design
//-----------------------------------------
assign clk[1] = clk_int[1];
assign clk[2] = clk_int[2];
// Reset synchronizer
//-----------------------------------
generate for (count_gen = 1; count_gen <= NUM_C; count_gen = count_gen + 1) begin: counters_1
always @(posedge reset_int or posedge clk[count_gen]) begin
if (reset_int) begin
rst_sync[count_gen] <= 1'b1;
rst_sync_int[count_gen]<= 1'b1;
rst_sync_int1[count_gen]<= 1'b1;
rst_sync_int2[count_gen]<= 1'b1;
end
else begin
rst_sync[count_gen] <= 1'b0;
rst_sync_int[count_gen] <= rst_sync[count_gen];
rst_sync_int1[count_gen] <= rst_sync_int[count_gen];
rst_sync_int2[count_gen] <= rst_sync_int1[count_gen];
end
end
end
endgenerate
// Output clock sampling
//-----------------------------------
generate for (count_gen = 1; count_gen <= NUM_C; count_gen = count_gen + 1) begin: counters
always @(posedge clk[count_gen] or posedge rst_sync_int2[count_gen]) begin
if (rst_sync_int2[count_gen]) begin
counter[count_gen] <= #TCQ { C_W { 1'b 0 } };
end else begin
counter[count_gen] <= #TCQ counter[count_gen] + 1'b 1;
end
end
// alias the high bit of each counter to the corresponding
// bit in the output bus
assign COUNT[count_gen] = counter[count_gen][C_W-1];
end
endgenerate
endmodule

68
ipcore_dir/hdmi_clk/example_design/hdmi_clk_exdes.xdc Executable file
View File

@@ -0,0 +1,68 @@
# file: hdmi_clk_exdes.xdc
#
# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
#
# This file contains confidential and proprietary information
# of Xilinx, Inc. and is protected under U.S. and
# international copyright and other intellectual property
# laws.
#
# DISCLAIMER
# This disclaimer is not a license and does not grant any
# rights to the materials distributed herewith. Except as
# otherwise provided in a valid license issued to you by
# Xilinx, and to the maximum extent permitted by applicable
# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
# (2) Xilinx shall not be liable (whether in contract or tort,
# including negligence, or under any other theory of
# liability) for any loss or damage of any kind or nature
# related to, arising under or in connection with these
# materials, including for any direct, or any indirect,
# special, incidental, or consequential loss or damage
# (including loss of data, profits, goodwill, or any type of
# loss or damage suffered as a result of any action brought
# by a third party) even if such damage or loss was
# reasonably foreseeable or Xilinx had been advised of the
# possibility of the same.
#
# CRITICAL APPLICATIONS
# Xilinx products are not designed or intended to be fail-
# safe, or for use in any application requiring fail-safe
# performance, such as life-support or safety devices or
# systems, Class III medical devices, nuclear facilities,
# applications related to the deployment of airbags, or any
# other applications that could lead to death, personal
# injury, or severe property or environmental damage
# (individually and collectively, "Critical
# Applications"). Customer assumes the sole risk and
# liability of any use of Xilinx products in Critical
# Applications, subject only to applicable laws and
# regulations governing limitations on product liability.
#
# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
# PART OF THIS FILE AT ALL TIMES.
#
# Input clock periods. These duplicate the values entered for the
# input clocks. You can use these to time your system
#----------------------------------------------------------------
create_clock -name CLK_IN1 -period 20.000 [get_ports CLK_IN1]
set_propagated_clock CLK_IN1
set_input_jitter CLK_IN1 0.2
# FALSE PATH constraint added on COUNTER_RESET
set_false_path -from [get_ports "COUNTER_RESET"]
# Derived clock periods. These are commented out because they are
# automatically propogated by the tools
# However, if you'd like to use them for module level testing, you
# can copy them into your module level timing checks
#-----------------------------------------------------------------
#-----------------------------------------------------------------
#-----------------------------------------------------------------